Show simple item record

dc.contributor.authorGenick Bar-Meir
dc.date.accessioned2017-05-08T23:47:21Z
dc.date.available2017-05-08T23:47:21Z
dc.date.copyrightApril, 1995
dc.date.issued1995
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26970#215_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/115415
dc.description.abstractAir entrainment is one of the most significant problems in pressure die casting. A possible solution is to use the Pore Free technique. In this technique an oxygen is introduced into the die to react with the liquid metal. The vacuum created by the reaction reduces the porosity. The life span of the mold is augmented by the reduction of the pressure during the process. In some cases the Pore Free technique yields acceptable results, i.e., low porosity, while in other cases the results are not satisfactory. These differing results can be explained by an analysis of the mechanisms involved. A simple model is proposed based on conservation laws that describes the relationship between mass transfer mechanisms and pressure deviation. The model indicates that there is a critical dimensionless parameter above which the pressure is decreased and below which the pressure is increased. In the first case, when the parameter exceeds the critical value, the technique is useful. In the second case, when the parameter is less than the critical value, introducing oxygen does not greatly reduce the porosity. The analysis demonstrates that the Pore Free and vacuum venting techniques account for two different extremes. The first case is when the flow is orderly throughout the chamber in which vacuum venting can produce acceptable results. The second case is when the flow is turbulent and the Pore Free technique is the better choice.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAnalysis of Mass Transfer Process in the Pore Free Technique
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2804532
dc.journal.fristpage215
dc.journal.lastpage219
dc.identifier.eissn1528-8889
dc.keywordsMass transfer
dc.keywordsPressure
dc.keywordsVacuum
dc.keywordsPorosity
dc.keywordsMechanisms
dc.keywordsFlow (Dynamics)
dc.keywordsOxygen
dc.keywordsTurbulence
dc.keywordsLiquid metals AND Die casting (Process)
dc.treeJournal of Engineering Materials and Technology:;1995:;volume( 117 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record