Show simple item record

dc.contributor.authorPeter J. Bonacuse
dc.contributor.authorSreeramesh Kalluri
dc.date.accessioned2017-05-08T23:47:21Z
dc.date.available2017-05-08T23:47:21Z
dc.date.copyrightApril, 1995
dc.date.issued1995
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26970#191_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/115411
dc.description.abstractThe results are reported for high-temperature axial and torsional low-cycle fatigue experiments performed at 760° C in air on thin-walled tubular specimens of Haynes 188, a wrought cobalt-base superalloy. Data are also presented for mean coefficient of thermal expansion, elastic modulus, and shear modulus at various temperatures from room to 1000° C, and monotonic and cyclic stress-strain curves in tension and in shear at 760° C. This data set is used to evaluate several multiaxial fatigue life models (most were originally developed for room temperature multiaxial life prediction) including von Mises equivalent strain range (ASME Boiler and Pressure Vessel Code), Manson-Halford, Modified Multiaxiality Factor (proposed in this paper). Modified Smith-Watson-Topper, and Fatemi-Socie-Kurath. At von Mises equivalent strain ranges (the torsional strain range divided by 3, taking the Poisson’s ratio to be 0.5), torsionally strained specimens lasted, on average, factors of 2 to 3 times longer than axially strained specimens. The Modified Multiaxiality Factor approach shows promise as a useful method of estimating torsional fatigue life from axial fatigue data at high temperatures. Several difficulties arose with the specimen geometry and extensometry used in these experiments. Cracking at extensometer probe indentations was a problem at smaller strain ranges. Also, as the largest axial and torsional strain range fatigue tests neared completion, a small amount of specimen buckling was observed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleElevated Temperature Axial and Torsional Fatigue Behavior of Haynes 188
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2804529
dc.journal.fristpage191
dc.journal.lastpage199
dc.identifier.eissn1528-8889
dc.keywordsFatigue
dc.keywordsTemperature
dc.keywordsFatigue life
dc.keywordsHigh temperature
dc.keywordsThermal expansion
dc.keywordsFatigue testing
dc.keywordsGeometry
dc.keywordsLow cycle fatigue
dc.keywordsProbes
dc.keywordsShear modulus
dc.keywordsTension
dc.keywordsCobalt
dc.keywordsSuperalloys
dc.keywordsPoisson ratio
dc.keywordsShear (Mechanics)
dc.keywordsStress-strain curves
dc.keywordsFracture (Process)
dc.keywordsASME Boiler and Pressure Vessel Code
dc.keywordsBuckling AND Elastic moduli
dc.treeJournal of Engineering Materials and Technology:;1995:;volume( 117 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record