Show simple item record

dc.contributor.authorFadi Taha
dc.contributor.authorAlejandro Graf
dc.contributor.authorWilliam Hosford
dc.date.accessioned2017-05-08T23:47:21Z
dc.date.available2017-05-08T23:47:21Z
dc.date.copyrightApril, 1995
dc.date.issued1995
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26970#168_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/115407
dc.description.abstractA simple way of making plane-strain tension tests on sheet specimens has been developed. This method was used to test sheets of aluminum alloy 2008 T4 and the results were analyzed in terms of a high exponent yield criterion and isotropic hardening. Experimentally measured forces agreed with those calculated from strain measurements using uniaxial tension test curves.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePlane-Strain Tension Tests on Aluminum Alloy Sheet
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2804524
dc.journal.fristpage168
dc.journal.lastpage171
dc.identifier.eissn1528-8889
dc.keywordsAluminum alloys
dc.keywordsPlane strain
dc.keywordsTension
dc.keywordsForce
dc.keywordsStrain measurement AND Hardening
dc.treeJournal of Engineering Materials and Technology:;1995:;volume( 117 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record