Show simple item record

dc.contributor.authorS. M. Arnold
dc.contributor.authorA. F. Saleeb
dc.contributor.authorT. E. Wilt
dc.date.accessioned2017-05-08T23:47:21Z
dc.date.available2017-05-08T23:47:21Z
dc.date.copyrightApril, 1995
dc.date.issued1995
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26970#157_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/115406
dc.description.abstractSpecific forms for both the Gibb’s and the complementary dissipation potentials were chosen such that a complete potential based multiaxial, isothermal, viscoplastic model was obtained. This model, in general, possesses three internal state variables (two scalars associated with dislocation density and one tensor associated with dislocation motion) both thermal and dynamic recovery mechanisms, and nonlinear kinematic hardening. This general model, although possessing associated flow and evolutionary laws, is shown to emulate three distinct classes of theories found in the literature, by modification of the driving threshold function F. A parametric study was performed on a specialized nondimensional multiaxial form containing only a single tensorial internal state variable (i.e., internal stress). The study was conducted with the idea of examining the impact of including a strain-induced recovery mechanism and the compliance operator, derived from the Gibb’s potential, on the uniaxial and multiaxial response. One important finding was that inclusion of strain-induced recovery provided the needed flexibility in modeling stress-strain and creep response of metals at low homologous temperatures, without adversely affecting the high temperature response. Furthermore, for nonproportional loading paths, the inclusion of the compliance operator had a significant influence on the multiaxial response, but had no influence on either uniaxial or proportional load histories.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Modeling Investigation of Thermal and Strain Induced Recovery and Nonlinear Hardening in Potential Based Viscoplasticity
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2804523
dc.journal.fristpage157
dc.journal.lastpage167
dc.identifier.eissn1528-8889
dc.keywordsModeling
dc.keywordsHardening
dc.keywordsViscoplasticity
dc.keywordsStress
dc.keywordsMechanisms
dc.keywordsEnergy dissipation
dc.keywordsTensors
dc.keywordsDislocation density
dc.keywordsDislocation motion
dc.keywordsHigh temperature
dc.keywordsScalars
dc.keywordsFlow (Dynamics)
dc.keywordsPlasticity
dc.keywordsCreep
dc.keywordsTemperature AND Metals
dc.treeJournal of Engineering Materials and Technology:;1995:;volume( 117 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record