Show simple item record

dc.contributor.authorY. Takahashi
dc.contributor.authorM. Tanimoto
dc.date.accessioned2017-05-08T23:47:20Z
dc.date.available2017-05-08T23:47:20Z
dc.date.copyrightJuly, 1995
dc.date.issued1995
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26972#330_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/115399
dc.description.abstractAn interfacial contact process due to power law creep is studied using a finite element technique. The contact process is assumed to be produced by power law creep alone after initial intimate contact by instantaneous plastic deformation, i.e., no diffusional mechanisms for void shrinkage are taken into account. Also, the surface oxide film is not considered. If the bonded material is deformed, then the deformation is influenced by the initial faying surface wauiness with the asperity angle αo , and the contact process is achieved by two modes; surface folding at the bond-interface (type I) and interfacial expansion (type II), where the surface folding is the phenomenon that two faying surfaces are overlapped to each other. The surface folding phenomenon occurs preferentially when αo is less than 30 deg (as the surface wauiness height decreases). On the other hand, the interfacial expansion is dominant at αo > 45 deg. This can be explained in terms of the distribution of equivalent strain (stress) in the vicinity of the bond-interface.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffect of Surface Asperity on Interfacial Contact Process Controlled by Power Law Creep—Numerical Study of Viscoplastic Adhering Process
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2804547
dc.journal.fristpage330
dc.journal.lastpage335
dc.identifier.eissn1528-8889
dc.keywordsCreep AND Project tasks
dc.treeJournal of Engineering Materials and Technology:;1995:;volume( 117 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record