Show simple item record

dc.contributor.authorTakamoto Itoh
dc.contributor.authorMasao Sakane
dc.contributor.authorDarrell F. Socie
dc.contributor.authorMasateru Ohnami
dc.date.accessioned2017-05-08T23:47:20Z
dc.date.available2017-05-08T23:47:20Z
dc.date.copyrightJuly, 1995
dc.date.issued1995
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26972#285_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/115393
dc.description.abstractThis paper describes a multiaxial low cycle fatigue parameter for correlating Hues under nonproportional loadings. Constant amplitude low cycle fatigue tests were carried out under 14 proportional and complex nonproportional cyclic strain paths using type 304 stainless steel hollow cylinder specimens at room temperature. In nonproportional loading tests, fatigue lives are decreased by as much as a factor of 10 in comparison with those in proportional loading tests with the same strain range. Reduction in fatigue life due to nonproportional loading is closely related to additional nonproportional cyclic hardening. The product of the maximum principal stress and strain ranges correlated the nonproportional fatigue data. A nonproportional cyclic hardening parameter computed from the strain path is also proposed that allows life estimates to be obtained directly from the strain history without the need for a cyclic plasticity model.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNonproportional Low Cycle Fatigue Criterion for Type 304 Stainless Steel
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2804541
dc.journal.fristpage285
dc.journal.lastpage292
dc.identifier.eissn1528-8889
dc.keywordsLow cycle fatigue AND Stainless steel
dc.treeJournal of Engineering Materials and Technology:;1995:;volume( 117 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record