Show simple item record

dc.contributor.authorDaniel C. Drucker
dc.date.accessioned2017-05-08T23:47:18Z
dc.date.available2017-05-08T23:47:18Z
dc.date.copyrightOctober, 1995
dc.date.issued1995
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26974#368_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/115366
dc.description.abstractThe quasistatic inelastic deformation of ductile structural metals observed on the macroscale reflects a diversity of dynamic inelastic effects on the microscale. The generation, motion, and immobilization of dislocations are primary among them, but a host of other activities such as the opening and growth of cracks and voids, also may contribute. Dynamic activity on the microscale is strongly time-dependent on the time scales of importance to the microscopic processes. Also, the atomic configurations of single dislocations and groups of dislocations are highly unstable over a significant portion of each path of rapid motion. Nevertheless, engineers continue to design structures and machines with a reasonable factor of safety against failure on the basis of conventional plasticity theory with its assumption of both time-independence and stability (normality and convexity). This discussion of the validity of these simplifying assumptions for macroscopic constitutive relations despite instability and time-dependence on the atomic- and micro-scale expands upon a recent paper with Ming Li.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFrom Instability and Time Dependence on the Microscale to Stability and Time Independence on the Macroscale
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2804727
dc.journal.fristpage368
dc.journal.lastpage372
dc.identifier.eissn1528-8889
dc.keywordsStability
dc.keywordsMicroscale devices
dc.keywordsDislocations
dc.keywordsMotion
dc.keywordsEngineers
dc.keywordsStructural metals
dc.keywordsFracture (Materials)
dc.keywordsSafety engineering
dc.keywordsConstitutive equations
dc.keywordsDesign
dc.keywordsPlasticity
dc.keywordsDeformation
dc.keywordsMachinery AND Failure
dc.treeJournal of Engineering Materials and Technology:;1995:;volume( 117 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record