Show simple item record

dc.contributor.authorC. A. Cook
dc.contributor.authorV. A. Cundy
dc.date.accessioned2017-05-08T23:47:02Z
dc.date.available2017-05-08T23:47:02Z
dc.date.copyrightMarch, 1995
dc.date.issued1995
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26459#50_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/115232
dc.description.abstractHeat transfer between a rotating wall and a bed of granular material is investigated. Three specific areas of this problem are studied. First, a Stefan-type model is used to evaluate the importance of evaporation near the wall on the wall-to-bed heat transfer coefficient. Next, a heat-balance integral method is used to model wall-to-bed heat transfer, including both evaporation within the bed and a thermal contact resistance between the wall and the first layer of particles. The method is evaluated and then compared to an approximate means with which to include the thermal contact resistance. Thirdly, the wall-to-bed heat transfer problem is solved under the condition of a linearly changing wall temperature. This solution is used to evaluate the consequences of the common isothermal wall assumption.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Study of Parameters Influencing Wall-to-Bed Heat Transfer in Low-Temperature Rotary Desorbers
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue1
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2835320
dc.journal.fristpage50
dc.journal.lastpage57
dc.identifier.eissn1528-8994
dc.keywordsHeat transfer AND Low temperature
dc.treeJournal of Energy Resources Technology:;1995:;volume( 117 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record