Show simple item record

dc.contributor.authorC. C. Doumanidis
dc.date.accessioned2017-05-08T23:46:46Z
dc.date.available2017-05-08T23:46:46Z
dc.date.copyrightDecember, 1995
dc.date.issued1995
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26219#625_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/115058
dc.description.abstractA variety of geometric, material structure, and stress/distortion attributes are needed to characterize the quality of thermally manufactured products. Because of in-process sensing difficulties and transportation lags, these features must be regulated in real time through appropriate thermal outputs, measured by non-contact infrared pyrometry. In thermal processes with a localized, sequentially moving heat source, the necessary heat input distribution on the part surface is supplied by an innovative timeshared or scanned torch modulation, in a raster or vector pattern. A unified lumped multivariable and a distributed-parameter quasilinear modeling formulation provide a design methodology and real-time reference for the development of finite- or infinite-state adaptive thermal control systems. These controllers modulate the power and motion of a single torch, supplying distinct concentrated heat inputs or a continuous power distribution on the part surface, so as to obtain the specified thermal characteristics or the entire temperature field. These regulation strategies are computationally tested and implemented experimentally in arc welding, but their applicability can be extended to a variety of thermal manufacturing processes.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThermal Manufacturing Process Control by Lumped Mimo and Distributed-Parameter Methods
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue4
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2801123
dc.journal.fristpage625
dc.journal.lastpage632
dc.identifier.eissn1528-9028
dc.keywordsManufacturing
dc.keywordsHeat
dc.keywordsTemperature
dc.keywordsControl systems
dc.keywordsControl equipment
dc.keywordsMotion
dc.keywordsArc welding
dc.keywordsStress
dc.keywordsDesign methodology
dc.keywordsModeling AND Transportation systems
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1995:;volume( 117 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record