Show simple item record

dc.contributor.authorSudhendu Rai
dc.contributor.authorHaruhiko Asada
dc.date.accessioned2017-05-08T23:46:44Z
dc.date.available2017-05-08T23:46:44Z
dc.date.copyrightDecember, 1995
dc.date.issued1995
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26219#503_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/115039
dc.description.abstractThis paper presents the integrated structure/control design of high speed single link robots based on time-optimal control and finite element analysis. First, the solutions of a time optimal control problem are analyzed with respect to the arm link inertia and its structural flexibility. A new technique is developed to further reduce the optimal traveling time by redesigning the arm structure through the trade-off analysis between the arm inertia and its natural frequency. In the latter half of the paper, the design criterion is extended to multiple indices by considering residual vibrations, load bearing capacity and other design constraints. For suppressing residual vibrations, a simple feedback control is designed and its dynamic performance with respect to pole-zero locations is improved along with other criteria through mechanical structure modification. The finite element method is used as a modeling tool and the shape of the arm geometry is modified as design parameters. An arm is designed which performs much better as compared to the design which is done without considering the interactions between physical structure and control. The newly designed arm is tested by constructing an experimental setup. The results show significantly improved performance.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleIntegrated Structure/Control Design of High Speed Flexible Robots Based on Time Optimal Control
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue4
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2801107
dc.journal.fristpage503
dc.journal.lastpage512
dc.identifier.eissn1528-9028
dc.keywordsRobots
dc.keywordsDesign
dc.keywordsTime optimal control
dc.keywordsVibration
dc.keywordsInertia (Mechanics)
dc.keywordsPlasticity
dc.keywordsFinite element analysis
dc.keywordsModeling
dc.keywordsPoles (Building)
dc.keywordsFinite element methods
dc.keywordsTravel time (Traffic engineering)
dc.keywordsLoad bearing capacity
dc.keywordsFeedback
dc.keywordsGeometry
dc.keywordsShapes AND Mechanical structures
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1995:;volume( 117 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record