Show simple item record

dc.contributor.authorR. Sandström
dc.contributor.authorS.-T. Tu
dc.date.accessioned2017-05-08T23:45:26Z
dc.date.available2017-05-08T23:45:26Z
dc.date.copyrightFebruary, 1994
dc.date.issued1994
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28350#76_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/114286
dc.description.abstractThe conventional way to define the weldment creep strength reduction factor is usually based on uniaxial creep data of weld metals and parent metals. In order to take the multiaxial effect into consideration, this paper has defined a structural transfer function which can be evaluated from general creep stress analysis. An analytical model is then proposed in the light of the function. Two numerical examples of typical weld properties show that the transfer function has a load-independent feature, which allows one to obtain multiaxial stress components in a weldment through minimal computation effort. Fairly good estimation of the stress level in the weld metal is achieved. On the basis of the present semi-analytical procedure, the weldment creep strength reduction factors are evaluated. For a 0.5Cr0.5Mo0.25V butt-welded tube under internal pressure, which has a higher weld metal creep-rupture strength, and lower weld metal creep strain rate, the reduction factors range from 0.9 to 0.95. For the AISI 316 butt-welded tube of cold-worked parent metal and creep soft weld metal, lower strength reduction factors are found, but they may still be nonconservative due to stress enhancement in the heat-affected zone.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Effect of Multiaxiality on the Evaluation of Weldment Strength Reduction Factors in High-Temperature Creep
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2929561
dc.journal.fristpage76
dc.journal.lastpage80
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsCreep
dc.keywordsHeat
dc.keywordsMetals
dc.keywordsTransfer functions
dc.keywordsStress
dc.keywordsStress analysis (Engineering)
dc.keywordsHigh temperature creep
dc.keywordsComputation AND Rupture
dc.treeJournal of Pressure Vessel Technology:;1994:;volume( 116 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record