Show simple item record

dc.contributor.authorA. Loghman
dc.contributor.authorM. A. Wahab
dc.date.accessioned2017-05-08T23:45:22Z
dc.date.available2017-05-08T23:45:22Z
dc.date.copyrightMay, 1994
dc.date.issued1994
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28353#105_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/114254
dc.description.abstractA thick-walled closed-end cylinder of isotropic, homogeneous and strain-hardening material is considered in this study. Loading is assumed to consist of a temperature gradient as well as an internal pressure. Unloading is completely elastic without considering a Bauschinger effect. A generalized plane strain case in which the material obeys Von Mises yield criterion is studied. Using the yield criterion, critical conditions for a wide range of loading combinations and thickness ratios are investigated. After the critical condition is established, load is increased beyond the critical values and calculations are made for plastic stresses and strains and progress of plastic zone using an incremental theory of plasticity. Residual stresses are obtained as the cylinder is unloaded from a 25 and 50-percent overstrained condition. Reverse yielding is not considered while the residual stresses at the onset of reverse yielding are calculated. Loading function is assumed to follow the stress-strain curve of SUS 304 at a constant temperature of 400°C, which is selected from the experimental work of earlier researchers.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleLoading and Unloading of Thick-Walled Cylindrical Pressure Vessels of Strain-Hardening Material
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2929562
dc.journal.fristpage105
dc.journal.lastpage109
dc.identifier.eissn1528-8978
dc.keywordsPressure vessels
dc.keywordsWork hardening
dc.keywordsResidual stresses
dc.keywordsStress
dc.keywordsCylinders
dc.keywordsPlane strain
dc.keywordsThickness
dc.keywordsPressure
dc.keywordsPlasticity
dc.keywordsTemperature
dc.keywordsStress-strain curves AND Temperature gradients
dc.treeJournal of Pressure Vessel Technology:;1994:;volume( 116 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record