Show simple item record

dc.contributor.authorD. P. Roach
dc.contributor.authorT. G. Priddy
dc.date.accessioned2017-05-08T23:45:22Z
dc.date.available2017-05-08T23:45:22Z
dc.date.copyrightMay, 1994
dc.date.issued1994
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28353#96_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/114253
dc.description.abstractThe determination of the fully plastic response and pressure limit of a pressure vessel is of considerable importance in design, especially in autofrettage considerations. This paper presents the results of an experimental study which measured the maximum internal pressure which can be applied to thick-walled cylindrical vessels. Both aluminum and steel, with material properties ranging from ductile to brittle, were tested at stress levels through plastic and strain hardening ranges to fracture. From these tests, the pressure-expansion and through-thickness yielding characteristics were determined for these specimens. It is shown that a strain-to-failure criterion, based on the triaxiality of stress in the critical region, can be used to predict the complete pressure versus strain relations and maximum pressure for these cylinders. A simple tension-true stress-strain relation of the material is employed to analytically predict the response of the cylinder into the plastic regime. Finally, simplified theoretical and empirical formulas for bursting pressures are checked against the experimental results.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffect of Material Properties on the Strain to Failure of Thick-Walled Cylinders Subjected to Internal Pressure
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2929582
dc.journal.fristpage96
dc.journal.lastpage104
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsMaterials properties
dc.keywordsCylinders
dc.keywordsFailure
dc.keywordsStress
dc.keywordsFormulas
dc.keywordsTension
dc.keywordsThickness
dc.keywordsVessels
dc.keywordsWork hardening
dc.keywordsAutofrettage
dc.keywordsDesign
dc.keywordsFracture (Process)
dc.keywordsStress-strain relations
dc.keywordsAluminum
dc.keywordsSteel
dc.keywordsPressure vessels AND Brittleness
dc.treeJournal of Pressure Vessel Technology:;1994:;volume( 116 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record