Show simple item record

dc.contributor.authorT. Fukuoka
dc.date.accessioned2017-05-08T23:45:19Z
dc.date.available2017-05-08T23:45:19Z
dc.date.copyrightNovember, 1994
dc.date.issued1994
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28355#443_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/114231
dc.description.abstractHydraulic bolt tensioners are frequently used to tighten critical structural members with accurately controlled clamping force. The ratio of desired clamping force to initial tension is the most important factor to be predicted in advance for given joint configurations, which is termed “effective tensile coefficient” here. In this paper, an elementary and extensive approach to estimate the coefficient is proposed using spring elements, and a simple and practical equation is presented to evaluate the magnitude of “effective tensile coefficient” in terms of five spring rates of each part consisting of the joint. The relationship between “effective tensile coefficient” and grip length is investigated, including the influences of Young’s modulus of fastened plate. The validity of the elementary method proposed here is ascertained by comparing the results to those by experiment and FEM.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAnalysis of the Tightening Process of Bolted Joint With a Tensioner Using Spring Elements
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2929614
dc.journal.fristpage443
dc.journal.lastpage448
dc.identifier.eissn1528-8978
dc.keywordsSprings
dc.keywordsForce
dc.keywordsElasticity
dc.keywordsStructural elements (Construction)
dc.keywordsFinite element methods
dc.keywordsEquations
dc.keywordsFinite element model AND Tension
dc.treeJournal of Pressure Vessel Technology:;1994:;volume( 116 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record