Show simple item record

dc.contributor.authorA. S. Elansary
dc.contributor.authorD. N. Contractor
dc.date.accessioned2017-05-08T23:45:18Z
dc.date.available2017-05-08T23:45:18Z
dc.date.copyrightNovember, 1994
dc.date.issued1994
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28355#437_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/114230
dc.description.abstractOne of the objectives of this study was to reduce the undesirable dynamic pressure oscillation that occurs in a simple pipeline due to valve closure and to prevent the occurrence of column separation. This is accomplished by maximizing the minimum pressure in the pipeline. The second objective was to minimize the maximum dynamic pressure, and the third objective was to estimate the best (minimum) time of closure, T* c , that results in a pipe stress equal to the maximum allowable stress. The method of characteristics with the time-line interpolation technique was used to solve the transient stresses and pressures in a liquid-filled piping system. Frequency-dependent friction was used in the equation of motion for the fluid and the pipe wall. A nonlinear optimization technique was utilized to generate the optimum valve closure policy. Maximum and minimum pressure heads resulting from the optimal policy were calculated and compared with those resulting from a uniform valve closure. Plots of pressure variation at the valve for these two valve closure policies were also generated. Examples are presented to demonstrate the advantage of the optimum valve closure policy over the uniform valve closure policy. The reduction in the maximum dynamic pressure and stress at the valve for different T c is also presented.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleValve Closure: Method for Controlling Transients
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2929613
dc.journal.fristpage437
dc.journal.lastpage442
dc.identifier.eissn1528-8978
dc.keywordsValves
dc.keywordsPressure
dc.keywordsStress
dc.keywordsPipelines
dc.keywordsPipes
dc.keywordsEquations of motion
dc.keywordsOptimization
dc.keywordsFriction
dc.keywordsSeparation (Technology)
dc.keywordsFluids
dc.keywordsInterpolation
dc.keywordsPiping systems AND Oscillations
dc.treeJournal of Pressure Vessel Technology:;1994:;volume( 116 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record