Show simple item record

dc.contributor.authorM. Perl
dc.contributor.authorR. Aroné
dc.date.accessioned2017-05-08T23:45:18Z
dc.date.available2017-05-08T23:45:18Z
dc.date.copyrightNovember, 1994
dc.date.issued1994
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28355#389_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/114222
dc.description.abstractThe basic concept of a new experimental method for measuring the level of autofrettage in thick-walled cylinders as well as a comprehensive numerical simulation were presented in Part I of this paper. A pilot test is conducted herein on a 105-mm autofrettage gun barrel to validate the proposed procedure. First, a preliminary test is performed to determine the minimum thickness required for a ring, cut from the barrel, in order to be a representative, valid, and free of edge-effect specimen. Then, the main experiment is conducted consisting of the gradual release of the residual stress field due to autofrettage prevailing in the ring specimen. An array of seven equally spaced, identical, radial notches is progressively cut at the inner surface of the ring, while the released hoop stress is continuously measured by a strain gage-based computerized data acquisition system. The process is accomplished by a detailed numerical simulation enabling a qualitative and quantitative monitoring of the procedure. The proposed experimental procedure is found to be feasible, reliable, and cost-effective, and to yield accurate results.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Axisymmetric Stress Release Method for Measuring the Autofrettage Level in Thick-Walled Cylinders—Part II: Experimental Validation
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2929606
dc.journal.fristpage389
dc.journal.lastpage395
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsCylinders
dc.keywordsAutofrettage
dc.keywordsComputer simulation
dc.keywordsGages
dc.keywordsThickness
dc.keywordsGun barrels AND Data acquisition systems
dc.treeJournal of Pressure Vessel Technology:;1994:;volume( 116 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record