Show simple item record

dc.contributor.authorM. Perl
dc.contributor.authorR. Aroné
dc.date.accessioned2017-05-08T23:45:18Z
dc.date.available2017-05-08T23:45:18Z
dc.date.copyrightNovember, 1994
dc.date.issued1994
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28355#384_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/114221
dc.description.abstractA new experimental method for measuring the level of autofrettage in thick-walled cylinders is suggested. The method is based on measuring the hoop-strain while axisymmetrically releasing the residual stress field prevailing in the cylinder’s wall. A parametric study of the proposed experimental procedure conducted by a finite element simulation yields a simple empirical relation, which readily enables determining the actual autofrettage level from the strain measurements. This relation is found to be practically unique for all relevant cases, i.e., cylinders with radii ratios of b/a =1.6÷2.2 and autofrettage percents of φ=50–100 percent. A pilot test conducted on a 105-mm autofrettaged gun barrel, which experimentally validates the proposed procedure, is presented in Part II (Perl and Arone, 1994) of this paper.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Axisymmetric Stress Release Method for Measuring the Autofrettage Level in Thick-Walled Cylinders—Part I: Basic Concept and Numerical Simulation
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2929605
dc.journal.fristpage384
dc.journal.lastpage388
dc.identifier.eissn1528-8978
dc.keywordsComputer simulation
dc.keywordsStress
dc.keywordsCylinders
dc.keywordsAutofrettage
dc.keywordsGun barrels
dc.keywordsStrain measurement
dc.keywordsFinite element analysis AND Simulation
dc.treeJournal of Pressure Vessel Technology:;1994:;volume( 116 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record