Show simple item record

dc.contributor.authorA. K. Tripathy
dc.contributor.authorH. J. Patel
dc.contributor.authorS. S. Pang
dc.date.accessioned2017-05-08T23:44:29Z
dc.date.available2017-05-08T23:44:29Z
dc.date.copyrightJanuary, 1994
dc.date.issued1994
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26961#121_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/113734
dc.description.abstractBox beams are widely used in weight reduction structures such as aircraft wings. The use of composite box beams further reduces the weight factor for such structures with the same deflection and stress as that of isotropic box beams. The difference in the behavior of composite box beams with different fiber orientation, number of plies, and number of stringers also provides a wide range of designing parameters to achieve the required performance for a given problem. A bending analysis has been carried out for the study of deflections and stresses for box beams of different material (isotropic and laminated composites), size, and number of stringers subjected to different kinds of loading conditions. A finite element model has been developed based on the strain energy principle, and the results are compared with an available commercial code “COSMOS/M.” Experiments using aluminum and scotchply composite laminates were conducted to verify the results. An optimal design for size and number of stiffeners for a given loading condition has been achieved. Investigations have also been carried out to find the effect of transverse shear on the span-wise normal stress.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleBending Analysis of Laminated Composite Box Beams
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2904247
dc.journal.fristpage121
dc.journal.lastpage129
dc.identifier.eissn1528-8889
dc.keywordsComposite materials
dc.keywordsStress
dc.keywordsDesign
dc.keywordsWeight (Mass)
dc.keywordsDeflection
dc.keywordsFinite element model
dc.keywordsWings
dc.keywordsAluminum
dc.keywordsUniverse
dc.keywordsFibers
dc.keywordsLaminates
dc.keywordsAircraft AND Shear (Mechanics)
dc.treeJournal of Engineering Materials and Technology:;1994:;volume( 116 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record