Show simple item record

dc.contributor.authorJ. H. Lee
dc.contributor.authorY. Zhang
dc.date.accessioned2017-05-08T23:44:28Z
dc.date.available2017-05-08T23:44:28Z
dc.date.copyrightJanuary, 1994
dc.date.issued1994
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26961#69_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/113727
dc.description.abstractGurson’s mixed hardening plasticity model (which takes into account the progressive damage due to void nucleation and growth of an initially dense material), with strain and stress-controlled nucleations, was used in a large deformation finite element program to study the plastic flow and damage in the uniaxial compression of cylinders under sticking friction. Effects of strain hardening, nucleation models, yield surface curvature, and geometry on the distributions and evolutions of stresses, strains, mean stress, void fractions, and coalescence are studied in detail. Using Gurson’s isotropic hardening model, positive mean and axial stresses developed at the bulge of the cylinder with growth of voids at latter stages of deformation. Due low stress triaxiality (Σm /σe <0.6) at the bulge, the process is nucleation rather than growth dominated for the majority of the cases studied. At failure, the maximum void fraction at the bulge among all cases studied is 0.085 and is far less than the critical void fraction (≈0.15) for coalescence.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Finite-Element Work-Hardening Plasticity Model of the Uniaxial Compression and Subsequent Failure of Porous Cylinders Including Effects of Void Nucleation and Growth—Part I: Plastic Flow and Damage
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2904257
dc.journal.fristpage69
dc.journal.lastpage79
dc.identifier.eissn1528-8889
dc.keywordsPlasticity
dc.keywordsDeformation
dc.keywordsNucleation (Physics)
dc.keywordsFinite element analysis
dc.keywordsCompression
dc.keywordsCylinders
dc.keywordsFailure
dc.keywordsWork hardening
dc.keywordsStress
dc.keywordsHardening
dc.keywordsPorosity
dc.keywordsFriction AND Geometry
dc.treeJournal of Engineering Materials and Technology:;1994:;volume( 116 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record