Show simple item record

dc.contributor.authorT. H. Krukemyer
dc.contributor.authorR. W. Swindeman
dc.contributor.authorA. Fatemi
dc.date.accessioned2017-05-08T23:44:28Z
dc.date.available2017-05-08T23:44:28Z
dc.date.copyrightJanuary, 1994
dc.date.issued1994
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26961#54_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/113725
dc.description.abstractAn experimental investigation was conducted on Haynes Alloy 556 to study the fatigue behavior of the material at elevated temperatures. Fatigue tests were run at constant temperatures ranging from room temperature to 871°C with strain ranges from 0.265 to 1.5 percent resulting in lives between 102 and 106 cycles. Cyclic deformation properties were evaluated based on the fatigue data. Three fatigue life models were evaluated for their ability to predict the isothermal fatigue lives of the material. These included the Ostergren, Frequency Separation and Stress-Strain-Time models. Strengths and weaknesses of each model are discussed based on the experimental results.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFatigue Behavior of a 22Cr-20Ni-18Co-Fe Alloy at Elevated Temperatures
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2904255
dc.journal.fristpage54
dc.journal.lastpage61
dc.identifier.eissn1528-8889
dc.keywordsAlloys
dc.keywordsFatigue
dc.keywordsTemperature
dc.keywordsSeparation (Technology)
dc.keywordsDeformation
dc.keywordsStress
dc.keywordsCycles
dc.keywordsFatigue life AND Fatigue testing
dc.treeJournal of Engineering Materials and Technology:;1994:;volume( 116 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record