Show simple item record

dc.contributor.authorL. C. Bank
dc.contributor.authorM. Nadipelli
dc.contributor.authorT. R. Gentry
dc.date.accessioned2017-05-08T23:44:27Z
dc.date.available2017-05-08T23:44:27Z
dc.date.copyrightApril, 1994
dc.date.issued1994
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26963#233_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/113711
dc.description.abstractAn experimental investigation of the local compression flange buckling and failure of commercially produced pultruded fiber-reinforced plastic (FRP) I-shaped beams is described in this paper. Results of tests on pultruded E-glass/polyester and E-glass/vinylester composite material beams are described. The test configuration was designed to cause local buckling and ultimate failure of the compression flange of the beams and to prevent global lateral-torsional buckling. The beams were stiffened to prevent crippling and warping at the supports, and local tensile failure at the load points. All beams were monitored with strain gages and LVDT’s. Buckling loads, failure loads, buckling stresses, deflections, and failure modes are reported. Effective mechanical properties of the beams, obtained from overall flexural and shear strain data, are presented. A discussion of the different failure characteristics of the polyester and the vinylester beams is provided.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleLocal Buckling and Failure of Pultruded Fiber-Reinforced Plastic Beams
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2904278
dc.journal.fristpage233
dc.journal.lastpage237
dc.identifier.eissn1528-8889
dc.keywordsBuckling
dc.keywordsFailure
dc.keywordsFiber reinforced plastics
dc.keywordsStress
dc.keywordsPolyester fabrics
dc.keywordsGlass
dc.keywordsCompression
dc.keywordsFlanges
dc.keywordsMechanical properties
dc.keywordsWarping
dc.keywordsDeflection
dc.keywordsComposite materials
dc.keywordsShear (Mechanics) AND Strain gages
dc.treeJournal of Engineering Materials and Technology:;1994:;volume( 116 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record