Show simple item record

dc.contributor.authorM. E. Barkey
dc.contributor.authorD. F. Socie
dc.contributor.authorK. J. Hsia
dc.date.accessioned2017-05-08T23:44:26Z
dc.date.available2017-05-08T23:44:26Z
dc.date.copyrightApril, 1994
dc.date.issued1994
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26963#173_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/113703
dc.description.abstractAn analytical method is developed to estimate notch root strains in a notched bar of elastic-plastic, isotropic material subjected to proportional and nonproportional multiaxial nominal loading. The method uses anisotropic plasticity theory to define a structural yield surface in nominal stress space that incorporates both the isotropic material properties and the anisotropic geometry factors of the notch. Notch root plastic strain increments and anisotropic work-hardening effects are then related to this yield surface using standard methods of plasticity. Comparisons of the proposed method with previously published strain estimates using the finite element method for a notched shaft under proportional nominal bending and torsion, and with strain gage measurements of a circumferentially notched solid steel shaft subjected to a series of box-shaped nonproportional loading paths in tension-torsion nominal stress space are presented. The strain calculations agree well both qualitatively and quantitatively using an appropriate nominal load-notch plastic strain relationship, and are suitable for strain-life fatigue calculations.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Yield Surface Approach to the Estimation of Notch Strains for Proportional and Nonproportional Cyclic Loading
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2904269
dc.journal.fristpage173
dc.journal.lastpage180
dc.identifier.eissn1528-8889
dc.keywordsPlasticity
dc.keywordsFatigue
dc.keywordsSteel
dc.keywordsMeasurement
dc.keywordsStress
dc.keywordsTorsion
dc.keywordsFinite element methods
dc.keywordsMaterials properties
dc.keywordsGeometry
dc.keywordsStrain gages
dc.keywordsTension AND Work hardening
dc.treeJournal of Engineering Materials and Technology:;1994:;volume( 116 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record