Show simple item record

dc.contributor.authorH. E. Hjelm
dc.date.accessioned2017-05-08T23:44:25Z
dc.date.available2017-05-08T23:44:25Z
dc.date.copyrightApril, 1994
dc.date.issued1994
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26963#148_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/113698
dc.description.abstractBiaxial plane stress experiments have been performed on cruciform specimens made of graphite grey cast iron. Different ratios of tensile and compressive loads were applied in two perpendicular directions. The primary objective of this investigation is to determine the locus of the yield surface (yield curve) under plane stress, and to establish yield functions that could model the elastoplastic behavior of grey cast iron with reasonably good accuracy. The experiments show that a sufficiently accurate description is obtained by using the ordinary von Mises yield function in the compressive-compressive region, and elsewhere, the von Mises yield function modified with a term containing the first stress invariant. It was also found that for tensile loadings nonelastic deformations develop at low stress levels. Use of the above yield function must therefore be accompanied by a very large hardening modulus for tensile loads.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleYield Surface for Grey Cast Iron Under Biaxial Stress
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2904265
dc.journal.fristpage148
dc.journal.lastpage154
dc.identifier.eissn1528-8889
dc.keywordsCast iron
dc.keywordsStress
dc.keywordsHardening
dc.keywordsFunctions
dc.keywordsGraphite AND Deformation
dc.treeJournal of Engineering Materials and Technology:;1994:;volume( 116 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record