Show simple item record

dc.contributor.authorL. A. Wittig
dc.contributor.authorD. H. Allen
dc.date.accessioned2017-05-08T23:44:25Z
dc.date.available2017-05-08T23:44:25Z
dc.date.copyrightJuly, 1994
dc.date.issued1994
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26965#421_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/113693
dc.description.abstractIn this paper, a micromechanical analysis is performed on a single ply continuous fiber SiC/Ti-15V-3Al-3Sn-3Cr (Ti-15-3) metal matrix composite to study the complex interactions between the composite microstructural components and the surrounding environment at high temperatures. Finite elements are incorporated to model oxygen diffusing into the free suface of a representative volume element (RVE) during cool down from the processing temperature. The resulting residual stress distribution is investigated assuming thermoelastic material models for the matrix, oxide layer, and fiber. Results indicate that the oxidized surface layer is prone to cracking upon subsequent mechanical loading, and this effect is strongly temperature dependent.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleModeling the Effect of Oxidation on Damage in SiC/Ti-15-3 Metal Matrix Composites
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2904308
dc.journal.fristpage421
dc.journal.lastpage427
dc.identifier.eissn1528-8889
dc.keywordsMetal matrix composites
dc.keywordsModeling
dc.keywordsoxidation
dc.keywordsTemperature
dc.keywordsFibers
dc.keywordsComposite materials
dc.keywordsOxygen
dc.keywordsHigh temperature
dc.keywordsStress concentration
dc.keywordsFinite element analysis AND Fracture (Process)
dc.treeJournal of Engineering Materials and Technology:;1994:;volume( 116 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record