Show simple item record

dc.contributor.authorSeung J. Song
dc.contributor.authorAnthony M. Waas
dc.date.accessioned2017-05-08T23:44:20Z
dc.date.available2017-05-08T23:44:20Z
dc.date.copyrightOctober, 1994
dc.date.issued1994
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26967#512_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/113652
dc.description.abstractA mechanical model which can predict mode I delamination failure of laminated composites has been developed. A beam on a nonlinear spring foundation was used to model experimental results obtained from DCB type fracture specimens. The entire thickness of the beam specimen was used as a spring length, and a nonuniform strain distribution throughout the spring length was utilized, based on the 2-D asymptotic solution of the stress field near a crack tip. The failure condition of the spring foundation is based on an energy criterion. Mode I fracture tests were performed to verify the current model using two types of laminated composite DCB specimens. The current model reproduced the experimental results of pulling force versus crack opening displacement curves very closely for a wide range of resin layer thickness of the specimens. The current model has a potential capability of being extended to solve 2-D crack problems, where the evolution of an arbitrary shape of 2-D crack geometry will be predicted as a part of the solution of the current model.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Spring Foundation Model for Mode I Failure of Laminated Composites Based on an Energy Criterion
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2904321
dc.journal.fristpage512
dc.journal.lastpage516
dc.identifier.eissn1528-8889
dc.keywordsComposite materials
dc.keywordsFailure
dc.keywordsSprings
dc.keywordsThickness
dc.keywordsFracture (Process)
dc.keywordsDisplacement
dc.keywordsStress
dc.keywordsGeometry
dc.keywordsResins
dc.keywordsShapes
dc.keywordsDelamination AND Force
dc.treeJournal of Engineering Materials and Technology:;1994:;volume( 116 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record