Show simple item record

dc.contributor.authorDavid A. ONeil
dc.contributor.authorSteven F. Wayne
dc.date.accessioned2017-05-08T23:44:19Z
dc.date.available2017-05-08T23:44:19Z
dc.date.copyrightOctober, 1994
dc.date.issued1994
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26967#471_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/113645
dc.description.abstractManufacturing processes used to deposit hard coatings often produce cracks which reside within the coating, at the interface, or in the substrate. These cracks originate from material defects and thermal expansion mismatch. When subjected to stress (from solid body contact) the cracks can act as flaws which initiate and/or propagate subsequent fracture contained entirely in the coating, substrate, interface, or combinations thereof. The finite element method has been used in conjunction with a numerical interface fracture mechanics model to investigate the structural response of coated brittle materials subjected to normal and shear loads (tribo-contact). Residual stresses from depositing TiC onto a WC-TiC-TaC-Co substrate were superimposed with loads that simulate a single point scratch test. Experimental observations of metallographic cross sections, taken through scratched TiC films, were used for verification and guidance in modeling. This study has examined how flaw orientation affects crack propagation through the coating, interface, and substrate. The importance of interface fracture toughness and anisotropy in coating mechanical properties are discussed in light of wear particle formation.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNumerical Simulation of Fracture in Coated Brittle Materials Subjected to Tribo-Contact
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2904315
dc.journal.fristpage471
dc.journal.lastpage478
dc.identifier.eissn1528-8889
dc.keywordsComputer simulation
dc.keywordsBrittleness
dc.keywordsFracture (Process)
dc.keywordsCoating processes
dc.keywordsStress
dc.keywordsAnisotropy
dc.keywordsCross section (Physics)
dc.keywordsShear (Mechanics)
dc.keywordsFinite element methods
dc.keywordsMechanical properties
dc.keywordsModeling
dc.keywordsCrack propagation
dc.keywordsFracture toughness
dc.keywordsParticulate matter
dc.keywordsThermal expansion
dc.keywordsFracture mechanics
dc.keywordsWear
dc.keywordsResidual stresses
dc.keywordsProduct quality AND Manufacturing
dc.treeJournal of Engineering Materials and Technology:;1994:;volume( 116 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record