Show simple item record

dc.contributor.authorP. R. Paslay
dc.contributor.authorE. P. Cernocky
dc.date.accessioned2017-05-08T23:44:03Z
dc.date.available2017-05-08T23:44:03Z
dc.date.copyrightMarch, 1994
dc.date.issued1994
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26453#49_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/113508
dc.description.abstractFlex joints in risers introduce abrupt directional changes along the drillstring. High drillstring stresses and flex joint wear rates are introduced, particularly when the drillstring tension is high. An analysis procedure is presented which finds the drillstring/flex joint contact loads in the vicinity of the flex joint as a function of the tension in the drillstring at the flex joint. The tensile and contact loads of the drillstring at the riser are used to estimate the wear rate on the flex joint and the axial and bending stresses in the drillstring. This example shows the value of the procedure in estimating maximum allowable angles for the flex joint.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePrediction of Wear and Stresses While Drilling Through a Riser Flex Joint
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue1
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2906009
dc.journal.fristpage49
dc.journal.lastpage55
dc.identifier.eissn1528-8994
dc.keywordsWear
dc.keywordsDrilling
dc.keywordsStress AND Pipeline risers
dc.treeJournal of Energy Resources Technology:;1994:;volume( 116 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record