Show simple item record

dc.contributor.authorM. G. Karfakis
dc.contributor.authorH.-J. Ouyang
dc.date.accessioned2017-05-08T23:44:03Z
dc.date.available2017-05-08T23:44:03Z
dc.date.copyrightMarch, 1994
dc.date.issued1994
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26453#38_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/113507
dc.description.abstractNumerical modeling of the rock-bit interaction process in laminated formation has been performed using a finite element approach. A finite element program was developed with the assumption of plane strain. Anisotropic elements, dynamic, loading, progressive failure, and variable stiffness were used to represent the actual penetration process. The Hoek and Brown failure criterion was used in the failure analysis. An interation method, using an incremental approach, has been applied for the continuous tooth penetration process where displacements, axial loads, strength and stiffness of elements are modified after each iteration. The program provides quantitative information on stress, displacement, and rock failure for each iteration. Furthermore, deviation due to laminated formation can be inferred and the effects of changing bit geometry can be assessed. The model also shows good quantitative agreement with laboratory wedge indentation tests.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNumerical Modeling of Rock-Bit Interaction in Laminated Formations
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue1
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2906008
dc.journal.fristpage38
dc.journal.lastpage48
dc.identifier.eissn1528-8994
dc.keywordsComputer simulation
dc.keywordsBits (Tools) AND Rocks
dc.treeJournal of Energy Resources Technology:;1994:;volume( 116 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record