Show simple item record

dc.contributor.authorC. S. Kabir
dc.contributor.authorA. R. Hasan
dc.date.accessioned2017-05-08T23:44:02Z
dc.date.available2017-05-08T23:44:02Z
dc.date.copyrightJune, 1994
dc.date.issued1994
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26455#121_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/113492
dc.description.abstractIn a pumping-well buildup test, computation of bottom-hole pressure (BHP) and flow rate (BHF) requires the use of a two-phase flow correlation for estimating the gas void-fraction or holdup along the pipe length and shut-in time. Various correlations are available to perform this task. The purpose of this work is to review these two-phase correlations and to provide an objective evaluation. This analysis is necessitated by the fact that considerable differences in BHP and BHF may occur—depending upon the correlation used—in wells with long pumping liquid columns or those that have high gas/liquid ratio production. Consequently, a potential exists for obtaining different reservoir parameters from transient interpretation. Using laboratory data for two-phase flow in annular geometry, relative strengths of these correlations are explored. Our own data and those of others (a total of 114 points) are used in this comparative study. For static liquid columns, the correlations of Hasan-Kabir, Gilbert, and Podio et al. provide acceptable agreement with experimental data, exceptions being the Godbey-Dimon and Schmidt et al. correlations. In contrast, for the moving liquid column scenario, as in a buildup test, the Hasan-Kabir model provides the best agreement with the dataset used in this work. A basis for smoothing the bubbly/slug transition boundary is given for the Hasan-Kabir method, together with a field example.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTwo-Phase Flow Correlations as Applied to Pumping Well Testing
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue2
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2906016
dc.journal.fristpage121
dc.journal.lastpage128
dc.identifier.eissn1528-8994
dc.keywordsWell testing services AND Two-phase flow
dc.treeJournal of Energy Resources Technology:;1994:;volume( 116 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record