Show simple item record

dc.contributor.authorM. Hubbard
dc.contributor.authorD. K. Krehbiel
dc.contributor.authorS. R. Gollahalli
dc.date.accessioned2017-05-08T23:44:00Z
dc.date.available2017-05-08T23:44:00Z
dc.date.copyrightSeptember, 1994
dc.date.issued1994
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26456#169_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/113475
dc.description.abstractA laboratory-scale experimental study of in-situ combustion for enhanced oil recovery is presented. The effects of oil saturation, preheating of the oil-sand bed, porosity of sand, and air-injection rate on both the time history of liquid yield and the total liquid yield have been determined. From the measured temperature profiles and charred length of oil-sand bed, the propagation rate of combustion front has been deduced. The volumetric concentrations of CO2 and O2 in the effluent gas have been measured. The rate of liquid yield is highest in the initial periods of insitu heating or combustion. Air-injection rate, although it has an indirect influence on the temperatures achieved in the bed, exerts only a weak effect on the liquid yield. The increase in porosity of sand increases the liquid yield rate. The relative effects of air injection rate, oil saturation, and the porosity of sand under combustion conditions are simulated well by preheating the bed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Laboratory-Scale Experimental Study of In-Situ Combustion Processes
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2906439
dc.journal.fristpage169
dc.journal.lastpage174
dc.identifier.eissn1528-8994
dc.keywordsCombustion AND Project tasks
dc.treeJournal of Energy Resources Technology:;1994:;volume( 116 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record