Show simple item record

dc.contributor.authorG. Cooper
dc.contributor.authorJ. H. Cohen
dc.contributor.authorP. A. Westcott
dc.contributor.authorM. Yang
dc.date.accessioned2017-05-08T23:44:00Z
dc.date.available2017-05-08T23:44:00Z
dc.date.copyrightDecember, 1994
dc.date.issued1994
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26458#273_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/113468
dc.description.abstractExperiments have been carried out to assess the rock-cutting ability of thermally stable diamond cutters of different sizes and shapes as individual cutting elements or on various drill bits. In general, penetration is proportional to weight on bit and cutter speed, with variations being dependent on cutter shape, size, and pressure environment. However, there is a marked difference in the penetration of the cutters into the rock at equivalent weight on cutter depending upon whether they are single or are mounted on a bit. It is believed that these large differences are related to the inability of the cuttings to escape from the gap between the bit and the rock face, i.e., poor cleaning. This observation holds promise that by improving the cleaning of the bit, even higher rates of penetration may be attained than the values achieved so far (800 ft/hr in Leuders limestone).
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Performance of Thermally Stable Diamonds When Used as Single Cutters Compared With Their Behavior in a Drill Bit
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2906453
dc.journal.fristpage273
dc.journal.lastpage277
dc.identifier.eissn1528-8994
dc.keywordsBits (Tools)
dc.keywordsDiamonds AND Thermal stability
dc.treeJournal of Energy Resources Technology:;1994:;volume( 116 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record