Show simple item record

dc.contributor.authorG. Cooper
dc.contributor.authorZ. Liu
dc.contributor.authorM. Yang
dc.date.accessioned2017-05-08T23:43:59Z
dc.date.available2017-05-08T23:43:59Z
dc.date.copyrightDecember, 1994
dc.date.issued1994
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26458#268_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/113466
dc.description.abstractSingle-cutter experiments have been performed to investigate the cutting and wear of thermally stable diamond (SYNDAX3) during rock cutting. Cutting forces increase linearly with depth of cut, but are unaffected by cutting speed. The wear of the cutter per mass of rock removed is found to decrease with increasing depth of cut. Excessive cutting speed is harmful to the cutter since both the cutter temperature and the change in cutter temperature per power input increase with cutting speed. In the cutting experiments, evidence of delayed fracturing is observed. For essentially constant cutting conditions, fractures develop in the cutter only after a significant amount of cutting is done. Damage of this type is very harmful to the cutter as cutter temperature rises and efficiency drops with increasing wear.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Wear of Thermally Stable Diamond During Rock Cutting
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2906452
dc.journal.fristpage268
dc.journal.lastpage272
dc.identifier.eissn1528-8994
dc.keywordsWear
dc.keywordsCutting
dc.keywordsDiamonds
dc.keywordsRocks AND Thermal stability
dc.treeJournal of Energy Resources Technology:;1994:;volume( 116 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record