Show simple item record

dc.contributor.authorG. M. Clydesdale
dc.contributor.authorA. Leseultre
dc.contributor.authorE. Lamine
dc.date.accessioned2017-05-08T23:43:59Z
dc.date.available2017-05-08T23:43:59Z
dc.date.copyrightDecember, 1994
dc.date.issued1994
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26458#258_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/113465
dc.description.abstractA corehead was designed, manufactured and tested to reduce fluid invasion of the core. This is obtained by minimizing the exposure time of the core to the drilling fluid in increasing the rate of penetration (ROP). The design incorporates a medium heavyset polycrystalline diamond compact (PDC) cutting structure developed in accordance with cutting models and balancing methods used for drill bits. The highest ROP is achieved by a particular hydraulic design: flow ports shape and positioning to clean the cutting structure enhance the drilled cuttings removal while preventing drilling fluid in the throat of the corehead. Moreover, an internal lip works with a special inner barrel shoe to effectively seal off mud flow from the throat. All the design features have been subjected to laboratory tests, including measurement of pressure drop across the corehead and flow visualization studies. Flow visualization tests include high-speed filming of the flow and paint tracing to indicate the special flow pattern. In conjunction with lab tests, a numerical simulation was performed using fluid dynamics software to optimize hydraulic parameters. The low invasion core bit has been used in numerous applications. The performance achieved was significantly better than the average achieved over a period of years using various PDC coreheads. The rate of penetration was increased by a factor of 4.8 and bit life by 2.3 (often with reusable condition).
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleLow Invasion Corehead Reduces Mud Invasion While Improving Performances
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2906451
dc.journal.fristpage258
dc.journal.lastpage267
dc.identifier.eissn1528-8994
dc.keywordsFluid dynamics
dc.keywordsFlow (Dynamics)
dc.keywordsFluids
dc.keywordsStructures
dc.keywordsComputer simulation
dc.keywordsDrilling
dc.keywordsBits (Tools)
dc.keywordsGates (Closures)
dc.keywordsFlow visualization
dc.keywordsDesign
dc.keywordsComputer software
dc.keywordsCutting
dc.keywordsDiamonds
dc.keywordsPressure drop
dc.keywordsShapes AND Speed
dc.treeJournal of Energy Resources Technology:;1994:;volume( 116 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record