Show simple item record

dc.contributor.authorN. Sepehri
dc.contributor.authorP. D. Lawrence
dc.contributor.authorF. Sassani
dc.contributor.authorR. Frenette
dc.date.accessioned2017-05-08T23:43:48Z
dc.date.available2017-05-08T23:43:48Z
dc.date.copyrightJune, 1994
dc.date.issued1994
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26205#232_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/113370
dc.description.abstractThis paper addresses the control problem for a class of heavy-duty hydraulic machines in order to achieve coordinated motion control of the implement. A model and sensor-based control algorithm is proposed which is applied in conjunction with closed-loop components. The algorithm is basically a feedforward load compensating scheme which uses the measured hydraulic line pressures along with the appropriate portion of the hydraulic model to control the joint velocities. The effects of nonlinear dynamic coupling between the links, loading, coupled actuation and power limitations are compensated in this technique. The closed-loop part consists of PD components. A knowledge of some hydraulic parameters is the only requirement of this control scheme. The proposed approach has been examined through simulation and is supported by experimental evidence. The experiments were performed on a Caterpillar 215B excavator. The control program is written in the C language, running on a computer system which is interfaced between the human operator and the machine.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleResolved-Mode Teleoperated Control of Heavy-Duty Hydraulic Machines
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue2
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2899215
dc.journal.fristpage232
dc.journal.lastpage240
dc.identifier.eissn1528-9028
dc.keywordsHydraulic equipment
dc.keywordsSimulation
dc.keywordsMotion control
dc.keywordsStress
dc.keywordsAlgorithms
dc.keywordsComputers
dc.keywordsFeedforward control
dc.keywordsControl algorithms
dc.keywordsMachinery AND Sensors
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1994:;volume( 116 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record