Show simple item record

dc.contributor.authorH. H. Cheng
dc.date.accessioned2017-05-08T23:43:42Z
dc.date.available2017-05-08T23:43:42Z
dc.date.copyrightDecember, 1994
dc.date.issued1994
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26211#687_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/113308
dc.description.abstractThe real-time implementation of path planning, trajectory generation, and servo control for manipulation of the prototype UPSarm are presented in this paper. The prototype UPSarm, which is primarily designed for studying the feasibility of loading packages inside a trailer, is a ten degree-of-freedom hybrid serial-and-parallel-driven redundant robot manipulator. The direct, forward, inverse, and indirect kinematic solutions of the UPSarm using three coordinate spaces: actuator space, effective joint space, and world Cartesian coordinate space are derived for real-time path planning, trajectory generation, and control. The manipulation of the UPSarm is based upon a general-purpose path planner and trajectory generator. Provided with appropriate kinematics modules and sufficient computational power, this path planner and trajectory generator can be used for real-time motion control of any degree-of-freedom hybrid serial-and-parallel-driven electromechanical devices. A VMEbus-based distributed computing system has been implemented for real-time motion control of the UPSarm. A PID-based feedforward servo control scheme is used in our servo controller. The motion examples of the UPSarm programmed in our robot language will show the practical manipulation of hybrid serial-and-parallel-driven redundant kinematic chains.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleReal-Time Manipulation of a Hybrid Serial-and-Parallel-Driven Redundant Industrial Manipulator
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue4
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2899268
dc.journal.fristpage687
dc.journal.lastpage701
dc.identifier.eissn1528-9028
dc.keywordsManipulators
dc.keywordsTrajectories (Physics)
dc.keywordsServomechanisms
dc.keywordsMotion control
dc.keywordsEngineering prototypes
dc.keywordsDegrees of freedom
dc.keywordsPath planning
dc.keywordsGenerators
dc.keywordsActuators
dc.keywordsChain
dc.keywordsFeedforward control
dc.keywordsSpace
dc.keywordsRobots
dc.keywordsKinematics
dc.keywordsElectromechanical devices
dc.keywordsControl equipment AND Motion
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1994:;volume( 116 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record