Show simple item record

dc.contributor.authorH. Su
dc.contributor.authorA. Cornec
dc.contributor.authorK.-H. Schwalbe
dc.date.accessioned2017-05-08T23:42:23Z
dc.date.available2017-05-08T23:42:23Z
dc.date.copyrightMay, 1993
dc.date.issued1993
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28345#164_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/112540
dc.description.abstractA simple relationship for estimating the limit load of a structure with a crack located in a zone with high stress-strain concentration has been suggested using Neuber’s relation. Then, based on the engineering treatment model (ETM), a method for calculating the crack driving force in the structure with a stress concentration was developed. It has also been proved that under deformation plasticity theory and monotonic loading, the ETM can be justified theoretically. Relationships between ETM and other engineering methods have also been established. The predictions by ETM agree well with the test results of full-scale pressure vessels with corner cracks at the joint between cylinder and nozzle.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEngineering Treatment Model (ETM) for Crack Driving Force Estimation of Structures With Stress Concentration
dc.typeJournal Paper
dc.journal.volume115
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2929511
dc.journal.fristpage164
dc.journal.lastpage170
dc.identifier.eissn1528-8978
dc.keywordsForce
dc.keywordsStress concentration
dc.keywordsFracture (Materials)
dc.keywordsStress
dc.keywordsCorners (Structural elements)
dc.keywordsNozzles
dc.keywordsCylinders
dc.keywordsPlasticity
dc.keywordsDeformation AND Pressure vessels
dc.treeJournal of Pressure Vessel Technology:;1993:;volume( 115 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record