Show simple item record

dc.contributor.authorA. Borri
dc.contributor.authorS. Sorace
dc.date.accessioned2017-05-08T23:42:22Z
dc.date.available2017-05-08T23:42:22Z
dc.date.copyrightMay, 1993
dc.date.issued1993
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28345#156_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/112539
dc.description.abstractA review of the “smeared crack” approach to the finite element analysis of small tensile strength (STS) materials is presented. The most widely applied strategies for crack modeling, shear transfer mechanism, and the definition of the mechanical constitutive laws and failure criteria are critically discussed. The models and special options in the ANSYS, ADINA, and ABAQUS programs are considered in detail, and applied to the analysis of a square panel under boundary pressures. The three solutions were compared in terms of the final broadening of the panel cracked zones. The results of the analysis of an hemispherical dome over a cylindrical drum are also presented. The Romulus Temple in the Roman Forum was the reference structure for this FE model. The problem was analyzed by a special procedure using the ANSYS “concrete” element. The results were compared with those of a “discrete crack” solution which reproduced the real cracked configuration of the building, and then with an experimental survey carried out by the flat jack technique.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFE Analysis Strategies for Structural Materials With Small Tensile Strength
dc.typeJournal Paper
dc.journal.volume115
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2929510
dc.journal.fristpage156
dc.journal.lastpage163
dc.identifier.eissn1528-8978
dc.keywordsFinite element analysis
dc.keywordsTensile strength
dc.keywordsFracture (Materials)
dc.keywordsMechanisms
dc.keywordsModeling
dc.keywordsFailure
dc.keywordsFinite element model
dc.keywordsConcretes
dc.keywordsDomes (Structural elements)
dc.keywordsJacks (Lifting equipment) AND Shear (Mechanics)
dc.treeJournal of Pressure Vessel Technology:;1993:;volume( 115 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record