Show simple item record

dc.contributor.authorJ. M. Corum
dc.contributor.authorR. L. Battiste
dc.date.accessioned2017-05-08T23:42:22Z
dc.date.available2017-05-08T23:42:22Z
dc.date.copyrightMay, 1993
dc.date.issued1993
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28345#122_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/112533
dc.description.abstractThe results of a long-term (approximately 2-1/2 yr), high-temperature failure test of a pressurized nozzle-to-spherical-shell model made of a well-characterized heat of type 304 stainless steel are presented and compared with inelastic deformation and failure predictions. The model, which was tested at 593°C (1100°F), was instrumented with capacitive strain gages in key locations. In addition to recording strains, the surface of the model in the junction region was periodically examined throughout the test for the formation and progression of the creep cracking that ultimately led to a leakage failure. The inelastic analysis predictions were based on guidelines developed and used for design of elevated-temperature nuclear components. Similarly, the failure model used was that upon which the ASME elevated-temperature Code Case N-47 for nuclear components is based. Thus, the reasonable agreement observed between experimental results and predictions adds confidence in the overall design methodology for elevated-temperature components. The results also demonstrated the leak-before-break nature of failure and the fact that pressure-induced stresses do not necessarily relax with time.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePredictability of Long-Term Creep and Rupture in a Nozzle-to-Sphere Vessel Model
dc.typeJournal Paper
dc.journal.volume115
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2929505
dc.journal.fristpage122
dc.journal.lastpage127
dc.identifier.eissn1528-8978
dc.keywordsCreep
dc.keywordsRupture
dc.keywordsVessels
dc.keywordsNozzles
dc.keywordsFailure
dc.keywordsTemperature
dc.keywordsStress
dc.keywordsDesign
dc.keywordsDesign methodology
dc.keywordsFracture (Process)
dc.keywordsInelastic analysis
dc.keywordsHeat
dc.keywordsPressure
dc.keywordsDeformation
dc.keywordsLeakage
dc.keywordsHigh temperature
dc.keywordsLeak-before-break
dc.keywordsShells
dc.keywordsStainless steel
dc.keywordsStrain gages AND Junctions
dc.treeJournal of Pressure Vessel Technology:;1993:;volume( 115 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record