Show simple item record

dc.contributor.authorD. J. Nordham
dc.contributor.authorL. M. Kaldor
dc.date.accessioned2017-05-08T23:42:21Z
dc.date.available2017-05-08T23:42:21Z
dc.date.copyrightAugust, 1993
dc.date.issued1993
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28347#319_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/112528
dc.description.abstractA simple design procedure, based on 175 finite element analyses, was derived to predict the flexibility factor due to an in-plane or out-of-plane moment for a 90-deg curved pipe with end constraints composed of tangents of any length terminated by rigid flanges and no internal pressure loads. The results of this design procedure were then compared to flexibility factors obtained from additional finite element analyses and experimental work. Flexibility factors calculated using the design equations in the Power Piping Code (ANSI/ASME B31.1-1986) were also compared to all finite element and experimental work. It was found that this design procedure more accurately predicts the flexibility factors than the Power Piping Code.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDesign Procedure for Flexibility Factors of 90-Deg Curved Pipe Having Various Tangent Lengths (Design Paper)
dc.typeJournal Paper
dc.journal.volume115
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2929534
dc.journal.fristpage319
dc.journal.lastpage324
dc.identifier.eissn1528-8978
dc.keywordsPlasticity
dc.keywordsDesign
dc.keywordsPipes
dc.keywordsFinite element analysis
dc.keywordsPower Piping Code
dc.keywordsPressure
dc.keywordsEquations
dc.keywordsStress AND Flanges
dc.treeJournal of Pressure Vessel Technology:;1993:;volume( 115 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record