Show simple item record

dc.contributor.authorW. Jiang
dc.date.accessioned2017-05-08T23:42:21Z
dc.date.available2017-05-08T23:42:21Z
dc.date.copyrightAugust, 1993
dc.date.issued1993
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28347#291_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/112523
dc.description.abstractThis paper continues the investigation of the elastic-plastic response of thin-walled tubes subjected to combined axial and torsional loads. The stress-strain loop under arbitrary variable loading is first discussed. It is then shown that due to the kinematic hardening, a steady state, either one of the reversed plasticity or one of the elastic shakedown, can always be reached under cyclic loadings, with a hysteresis loop in the form of a parallelogram or a straight line. As a result, the difference in response between nonproportional and proportional loading will finally disappear. The investigation indicates that the simple kinematic hardening rule is able to describe, at least qualitatively, certain basic characteristics of the material behavior observed in nonproportional tests.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Elastic-Plastic Response of Thin-Walled Tubes Under Combined Axial and Torsional Loads: Part II—Variable Loading
dc.typeJournal Paper
dc.journal.volume115
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2929530
dc.journal.fristpage291
dc.journal.lastpage296
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsHardening
dc.keywordsSteady state AND Plasticity
dc.treeJournal of Pressure Vessel Technology:;1993:;volume( 115 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record