Show simple item record

dc.contributor.authorY. Tomita
dc.contributor.authorK. Tanabe
dc.contributor.authorK. Koyama
dc.date.accessioned2017-05-08T23:42:20Z
dc.date.available2017-05-08T23:42:20Z
dc.date.copyrightAugust, 1993
dc.date.issued1993
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28347#242_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/112516
dc.description.abstractElectron beam welding melts and solidifies steel plate without using any welding material, unlike the conventional welding. Therefore, the toughness at the weld metal can decrease, depending on the chemical composition of the steel plate. Toughness at the electron beam weld can be increased by turning the microstructure from upper bainite into lower bainite and making the effective grain size finer. The microstructure can be controlled by the addition of alloy elements and optimization of impurity elements. In case the chemical compositions cannot be varied, largely because of the specification for their ranges, and the weld metal microstructure remains as upper bainite even after the application of microstructure control, methods to improve the toughness of electron beam weld itself, regardless of steel grades, becomes necessary. Phenomena peculiar to the electron beam weld are segregation during solidification and intergranular segregation over the dendrite surface. The fracture initiation is accelerated by the microcracks caused by the segregations during solidification. The fracture propagation is promoted by intergranular cracking caused by the intergranular segregation. By reducing these segregations, the fracture initiation and propagation are restrained and toughness increases despite the upper bainite microstructure. This can be achieved by the higher purification of steel. Through the foregoing investigations, ASTM A533 Type B Class 2 steel plate of 100 mm in thickness for electron beam welds has been developed for pressure vessels. Various welding tests as pressure vessels have been conducted, and it becomes clear that the developed steel plate has excellent toughness at the weld superior to those obtainable by conventional welding. The use of this steel greatly reduces the welding period compared to the conventional welding method.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleImproving Toughness of Electron Beam Welds of Heavy Mn-Mo-Ni Steel Plates for Pressure Vessels
dc.typeJournal Paper
dc.journal.volume115
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2929523
dc.journal.fristpage242
dc.journal.lastpage248
dc.identifier.eissn1528-8978
dc.keywordsSteel
dc.keywordsPressure vessels
dc.keywordsElectron beam welding
dc.keywordsPlates (structures)
dc.keywordsToughness
dc.keywordsWelding
dc.keywordsFracture (Process)
dc.keywordsMetals
dc.keywordsSolidification
dc.keywordsGrain size
dc.keywordsMicrocracks
dc.keywordsThickness
dc.keywordsASTM International
dc.keywordsAlloys AND Optimization
dc.treeJournal of Pressure Vessel Technology:;1993:;volume( 115 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record