Show simple item record

dc.contributor.authorM. Miyahara
dc.contributor.authorK. Tokimasa
dc.date.accessioned2017-05-08T23:42:20Z
dc.date.available2017-05-08T23:42:20Z
dc.date.copyrightAugust, 1993
dc.date.issued1993
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28347#235_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/112515
dc.description.abstractTwo-step variable straining tests, which included CP- (slow-fast) type and PC- (fast-slow) type tests, were conducted at 600°C in air for Mod.9Cr-1Mo steel. In the tests, CP and PC-type strain range level varied from high to low for the high-low test and from low to high for the low-high test. The deviations of the experimental data from the linear damage rule prediction were observed. These experimental results and the effect of the strain waveform on the creep-fatigue properties under variable straining were well explained by the life prediction model previously proposed by the authors in which the strain range partitioned crack growth rate equations were applied.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCreep-Fatigue Properties of Mod.9Cr-1Mo Steel Under Variable Straining
dc.typeJournal Paper
dc.journal.volume115
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2929522
dc.journal.fristpage235
dc.journal.lastpage241
dc.identifier.eissn1528-8978
dc.keywordsCreep
dc.keywordsFatigue
dc.keywordsSteel
dc.keywordsFracture (Materials) AND Equations
dc.treeJournal of Pressure Vessel Technology:;1993:;volume( 115 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record