Show simple item record

dc.contributor.authorD. R. Lee
dc.contributor.authorJ. M. Bloom
dc.date.accessioned2017-05-08T23:42:19Z
dc.date.available2017-05-08T23:42:19Z
dc.date.copyrightAugust, 1993
dc.date.issued1993
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28347#228_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/112514
dc.description.abstractA critical part of the assessment of defects in power plant components, both fossil and nuclear, is the knowledge of the crack driving force (K 1 , J , or C* ). While the determination of the crack driving force is possible using finite element analyses, crack growth analyses using finite element methods can be expensive. Based on work by Il’yushin, it has been shown that for a power law hardening material, the fully plastic portion of the J -integral (or the C* -integral) is directly related to an h1 calibration function. The value of h1 is a function of the geometry and hardening exponent. The finite element program ABAQUS was used to evaluate the fully plastic J -integral and determine the h1 functions for various geometries. The Ramberg-Osgood deformation theory plasticity model, which may be used with the J -integral evaluation capability, allows the evaluation of fully plastic J solutions. Once it was established that the grid used to generate the h1 functions was adequate (based on the more recent work of Shih and Goan), additional runs were made of other configurations given in the EPRI Elastic-Plastic Fracture Handbook . Differences as great as 55 percent were found when compared to results given in the Handbook (single-edge crack plate under tension and plane stress with a/b = 0.5). Effects of errors in h1 on predicted failure load and creep crack growth are discussed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAssessment of Fully Plastic J and C*-Integral Solutions for Application to Elastic-Plastic Fracture and Creep Crack Growth
dc.typeJournal Paper
dc.journal.volume115
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2929521
dc.journal.fristpage228
dc.journal.lastpage234
dc.identifier.eissn1528-8978
dc.keywordsCreep
dc.keywordsFracture (Process)
dc.keywordsForce
dc.keywordsStress
dc.keywordsHardening
dc.keywordsFunctions
dc.keywordsFinite element analysis
dc.keywordsGeometry
dc.keywordsTension
dc.keywordsFinite element methods
dc.keywordsPlasticity
dc.keywordsDeformation
dc.keywordsProduct quality
dc.keywordsPower stations
dc.keywordsCalibration
dc.keywordsErrors AND Failure
dc.treeJournal of Pressure Vessel Technology:;1993:;volume( 115 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record