Show simple item record

dc.contributor.authorJ. Cordes
dc.contributor.authorR. Yazici
dc.contributor.authorM. Seo
dc.date.accessioned2017-05-08T23:42:17Z
dc.date.available2017-05-08T23:42:17Z
dc.date.copyrightNovember, 1993
dc.date.issued1993
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28349#348_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/112495
dc.description.abstractA finite element method was developed for evaluating an angled crack in a thin plate. In the spirit of the Dugdale and Barenbaltt damage zone models, the method superposes cohesive stresses in a damage zone onto a linear elastic fracture analysis. The method uses incremental changes in the boundary conditions along the damage zone to model loss in stiffness due to yielding and stable crack growth. A crack tip opening displacement criterion is used for predicting stable crack growth and unstable crack growth. The resulting nonlinear analysis is used to predict the applied loads at failure. Numerical results compared favorably with experimental values.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMixed-Mode Fracture in Plastically Deforming Materials
dc.typeJournal Paper
dc.journal.volume115
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2929540
dc.journal.fristpage348
dc.journal.lastpage352
dc.identifier.eissn1528-8978
dc.keywordsFracture (Process)
dc.keywordsStress
dc.keywordsFinite element methods
dc.keywordsBoundary-value problems
dc.keywordsDisplacement
dc.keywordsFailure AND Stiffness
dc.treeJournal of Pressure Vessel Technology:;1993:;volume( 115 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record