Show simple item record

dc.contributor.authorR. W. Neu
dc.contributor.authorHuseyin Sehitoglu
dc.date.accessioned2017-05-08T23:41:33Z
dc.date.available2017-05-08T23:41:33Z
dc.date.copyrightJanuary, 1993
dc.date.issued1993
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26954#83_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/112047
dc.description.abstractSystematic experiments were conducted on carburized 4320 steel to study thermalinduced transformation of austenite to bainite by measuring the volumetric transformation strains. Up to about 210°C, thermal-induced transformation involved a diffusion-controlled reaction and therefore was time dependent. The mechanism is similar to that described by the second stage of tempering. An Arhennius-type relation was used to model the kinetics of the reaction leading to a volume increase. A positive hydrostatic stress tended to increase the rate of transformation. The anisotropy of the transformation strains were proportional to the deviatoric stress.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThermal-Induced Transformation of Retained Austenite in the Simulated Case of a Carburized Steel
dc.typeJournal Paper
dc.journal.volume115
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2902161
dc.journal.fristpage83
dc.journal.lastpage88
dc.identifier.eissn1528-8889
dc.keywordsSteel
dc.keywordsStress
dc.keywordsAnisotropy
dc.keywordsMechanisms
dc.keywordsHydrostatics AND Diffusion (Physics)
dc.treeJournal of Engineering Materials and Technology:;1993:;volume( 115 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record