Show simple item record

dc.contributor.authorH. H. Chiang
dc.contributor.authorN. Santhanam
dc.contributor.authorK. K. Wang
dc.contributor.authorK. Himasekhar
dc.date.accessioned2017-05-08T23:41:32Z
dc.date.available2017-05-08T23:41:32Z
dc.date.copyrightJanuary, 1993
dc.date.issued1993
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26954#37_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/112040
dc.description.abstractThis work employs a coupled analysis of the fluid flow and heat transfer in the polymer melt during the filling and post-filling stages of the injection-molding process and of mold cooling/heating which occurs during the entire process. Polymer melt analysis (PMA) has been carried out through a unified theoretical model implemented using a hybrid finite-element/finite-difference/control-volume numerical solution of the generalized Hele-Shaw flow of a compressible viscous fluid under non-isothermal conditions. Further, mold-cooling analysis (MCA) has been carried out utilizing a periodic heat conduction model implemented using a modified three-dimensional boundary-element method. To faithfully accommodate the effects of mold cooling on the fluid flow and heat transfer in the polymer melt, PMA and MCA have been coupled for appropriate data exchange and iterations carried out until a convergent solution for mold temperatures and for flow, pressure and temperatures within the polymer melt is obtained. The results obtained from this integrated simulation for different test cases have been compared with experimental data and a favorable agreement has been noticed. Using an illustrative example, the results are discussed in detail.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleIntegrated Simulation of Fluid Flow and Heat Transfer in Injection Molding for the Prediction of Shrinkage and Warpage
dc.typeJournal Paper
dc.journal.volume115
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2902155
dc.journal.fristpage37
dc.journal.lastpage47
dc.identifier.eissn1528-8889
dc.keywordsHeat transfer
dc.keywordsSimulation
dc.keywordsInjection molding
dc.keywordsShrinkage (Materials)
dc.keywordsWarping
dc.keywordsFluid dynamics
dc.keywordspolymer melts
dc.keywordsCooling
dc.keywordsFlow (Dynamics)
dc.keywordsTemperature
dc.keywordsHeating
dc.keywordsPressure
dc.keywordsFluids
dc.keywordsHeat conduction
dc.keywordsBoundary element methods AND Finite element analysis
dc.treeJournal of Engineering Materials and Technology:;1993:;volume( 115 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record