Show simple item record

dc.contributor.authorY. Chen
dc.contributor.authorI. C. Sheng
dc.date.accessioned2017-05-08T23:41:32Z
dc.date.available2017-05-08T23:41:32Z
dc.date.copyrightJanuary, 1993
dc.date.issued1993
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26954#17_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/112037
dc.description.abstractEquilibrium and energy equations have been developed in describing the solid-fluid transition zone during the melting and solidification of the binary alloys. Due to the existence of the transition region exhibiting both solid and fluid phases at the same material point from continuum point of view, mixture theory was utilized to analyze the region. Unlike the Stefan problem, the latent heat due to the phase change appears as a source term in the heat equation. The molten fluid is treated as a thermoviscous and incompressible fluid, whereas the solid is thermoviscoplastic described by the Bodner-Partom/Walker type of constitutive equations. Thermal mechanical behaviors of the solid and the fluid phases are determined separately because of insignificant mechanical interactions between them. Volume fractions of the phases are obtained according to the equilibrium phase diagram. The simulation process of the transition zone and the welding process was carried out by FEM. The molten fluid motion, the sizes, and the contours of the transition zone were presented.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOn the Solid-Fluid Transition Zone in Welding Analysis
dc.typeJournal Paper
dc.journal.volume115
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2902150
dc.journal.fristpage17
dc.journal.lastpage23
dc.identifier.eissn1528-8889
dc.keywordsFluids
dc.keywordsWelding
dc.keywordsEquilibrium (Physics)
dc.keywordsEquations
dc.keywordsFinite element model
dc.keywordsIncompressible fluids
dc.keywordsLatent heat
dc.keywordsMixtures
dc.keywordsHeat
dc.keywordsMelting
dc.keywordsPhase diagrams
dc.keywordsFinite element methods
dc.keywordsConstitutive equations
dc.keywordsMechanical behavior
dc.keywordsSolidification
dc.keywordsSimulation
dc.keywordsAlloys AND Motion
dc.treeJournal of Engineering Materials and Technology:;1993:;volume( 115 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record