Show simple item record

dc.contributor.authorH. Huang
dc.contributor.authorJ. L. Hill
dc.contributor.authorJ. T. Berry
dc.contributor.authorV. K. Suri
dc.date.accessioned2017-05-08T23:41:31Z
dc.date.available2017-05-08T23:41:31Z
dc.date.copyrightJanuary, 1993
dc.date.issued1993
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26954#2_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/112035
dc.description.abstractOne of the major objectives of solidification modeling is to determine, prior to pouring, whether porosity, such as massive cavities and dispersed pores, are likely to appear in the casting. The numerical solutions of solidification heat transfer alone, however, cannot provide such information. In order to predetermine the presence of porosity, various criteria functions have been proposed by a number of investigators. These criteria functions are associated with cooling rate, thermal gradient, solidus velocity and local solidification time, etc. Since these parameters can be derived from numerical solutions, the reliability of porosity prediction largely depends on the accuracy of the numerical solutions employed. Thermal contact and phase change affect the numerical solutions significantly, and hence the local values of the predicted parameters. Consequently, these phenomena must be given special attention. This paper addresses some important aspects of thermal contact and phase change in determining the values of criteria functions. The free thermal contraction method is used to describe the variation and distribution of the heat transfer coefficient at the casting/mold interface. The phase change problem is treated by the heat source/sink algorithm. The sensitivity of criteria functions and the role of computational error are also discussed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleIssues in Thermal Contact and Phase Change in Porosity Prediction
dc.typeJournal Paper
dc.journal.volume115
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2902153
dc.journal.fristpage2
dc.journal.lastpage7
dc.identifier.eissn1528-8889
dc.keywordsPorosity
dc.keywordsFunctions
dc.keywordsSolidification
dc.keywordsCasting
dc.keywordsReliability
dc.keywordsAlgorithms
dc.keywordsModeling
dc.keywordsThermal expansion
dc.keywordsHeat
dc.keywordsHeat transfer
dc.keywordsCooling
dc.keywordsCavities
dc.keywordsErrors
dc.keywordsHeat transfer coefficients AND Temperature gradients
dc.treeJournal of Engineering Materials and Technology:;1993:;volume( 115 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record