Show simple item record

dc.contributor.authorB. R. Trethewey
dc.contributor.authorJ. W. Gillespie
dc.contributor.authorD. J. Wilkins
dc.date.accessioned2017-05-08T23:41:31Z
dc.date.available2017-05-08T23:41:31Z
dc.date.copyrightApril, 1993
dc.date.issued1993
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26956#193_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/112029
dc.description.abstractThe structural performance of thickness-tapered laminates has been investigated using an energy-based damage tolerance methodology. The geometry studied is a thin laminate with discontinuous internal plies and a through-width delamination embedded at the interface between continuous and discontinuous sublaminates. An analytic model, based on shear deformation plate theory and linear-elastic fracture mechanics is employed to determine the Mode I and Mode II components of strain energy release rate. A two-dimensional plane strain finite element analysis is conducted to confirm the accuracy of the analytic predictions. The resulting pure mode strain energy release rates are combined with a mixed-mode growth criterion to predict the axial load required to induce delamination growth. Finally, the analytic and numerical model were used to predict failure in a delamination critical test specimen. Reasonable agreement of the actual and predicted failure loads was observed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDelamination in Thickness Tapered Composite Laminates
dc.typeJournal Paper
dc.journal.volume115
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2904206
dc.journal.fristpage193
dc.journal.lastpage199
dc.identifier.eissn1528-8889
dc.keywordsComposite materials
dc.keywordsLaminates
dc.keywordsThickness
dc.keywordsDelamination
dc.keywordsStress
dc.keywordsFailure
dc.keywordsGeometry
dc.keywordsPlane strain
dc.keywordsShear deformation
dc.keywordsFinite element analysis
dc.keywordsComputer simulation AND Fracture mechanics
dc.treeJournal of Engineering Materials and Technology:;1993:;volume( 115 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record