Show simple item record

dc.contributor.authorD. N. Githuku
dc.contributor.authorA. J. Giacomin
dc.date.accessioned2017-05-08T23:41:28Z
dc.date.available2017-05-08T23:41:28Z
dc.date.copyrightOctober, 1993
dc.date.issued1993
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26959#433_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/112004
dc.description.abstractWhen plastic pipe is extruded, it emerges from an annular die and passes through a sizing sleeve to set its outer diameter. The pipe is then solidified in a cooling tank by spraying the outer surface with cold water. For thick walled pipe, material on the inside stays molten for a long time, and flows under its own weight. This gravitational flow (or sag) therefore governs the final pipe wall thickness distribution. Thus the solidification of extruded plastic pipe involves heat transfer with phase-change coupled with gravitational flow. The inside thermal boundary condition is arguably adiabatic. For the outside boundary, one can use either Newton’s law of cooling or an isothermal condition. In this paper, a commercially available spectral element code for simulating unsteady incompressible fluid flow with heat transfer, has been used to simulate sag flow. The model predictions of the solid pipe thickness distribution compared well with process data. Also, the effects of different heat transfer parameters on the thickness profile are evaluated. The extrusion temperature is found to have the greatest effect on the pipe wall profile.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Spectral Element Simulation of Gravitational Flow During Plastic Pipe Extrusion
dc.typeJournal Paper
dc.journal.volume115
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2904242
dc.journal.fristpage433
dc.journal.lastpage439
dc.identifier.eissn1528-8889
dc.keywordsFlow (Dynamics)
dc.keywordsSimulation
dc.keywordsPlastic pipes
dc.keywordsExtruding
dc.keywordsPipes
dc.keywordsHeat transfer
dc.keywordsCooling
dc.keywordsThickness
dc.keywordsWall thickness
dc.keywordsWater
dc.keywordsThermal boundary layers
dc.keywordsPlasma spraying
dc.keywordsWeight (Mass)
dc.keywordsTemperature
dc.keywordsSolidification AND Incompressible fluids
dc.treeJournal of Engineering Materials and Technology:;1993:;volume( 115 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record